Key Features
- Line Interactive UPS with simulated sinewave output
- Excellent microprocessor control guarantees high reliability(lnternal seif-diagnostic technology)
- Boost and buck AVR for voltage stabilization (wide input range with two boost and one buck control)
- Auto restart while AC is recovering
- Cold start function
Technical Parameters
Model | DG 600 |
Capacity(VA/Watts) | 600/360 |
Voltage | 220/230/240Vac |
Voltage Range | 140-300Vac |
Frequency Range | 50/60Hz (auto sensing) |
AC Voltage Regulation (Batt Mode) | ±10% |
Frequency Range (Batt. Mode) | 50/60Hz ±1Hz |
Transfer Time | Typical 4-8ms, 13ms Max. |
Waveform (Batt. Mode) | Simulated Sinewave |
Battery Voltage | 12Vdc |
Battery Type & Number | 12V/7Ahx1 |
Typical Recharge Time | 4-6 hours recover to 90% capacity |
LED Display(LED version) | AC Mode, Battery Mode, Overload, Fault |
LCD Display(LCD version) | AC Mode, Battery Mode, Load Levei, Battery Level, Input Voltage, Output Voltage, Overload, Fault, and Battery Low |
Full Protection | Short circuit, Overload, Overcharge and overdischarge protection |
Battery mode | Sounding every 1O seconds |
Low Battery | Sounding every second |
Overload | Sounding every 0.5 second |
Battery Replacement Alarm | Sounding every 2 seconds |
Fault | Continuously sounding |
Communication port | USB or RS232(Supports Windows® 2000/2003/XP/Vista/2008, Windows® 7, Linux, Unix, and MAC) |
Humidity | 0-90% RH @0-40°C (non-condensing) |
Noise Level | Less than 45dB |
Approx. Dimension D*W*H | 298*101*142 mm |
Approx. Net Weight | 4.3 kg |