Key Features
- High output capacity up to 45KW.
- Unbalance Load Acceptable Idle Consumption Search Mode, less than 100 W when Power Saver On.
- DC input voltage 12VDC / 24VDC / 48VDC.
- Powerful charge rate max charge current up to 450A (150A*3).
- Intelligent commnication port RS 232, RS 485, CAN port.
- Advanced MPPT solar charger controller Available.
- LED + LCD Display.
- Remote control optional (LED or LCD remote)
- Connection mode: 3-phase 4-wire / 3-phase 3-wire.
- AC Voltage: 3AC / N 400V / 207V.
- DC Voltage: 48VDC.
- Remote Control Seletable (RJ11 port / RJ45 port).
- UItra Low THD, less than 3% under full linear load (battery low).
- 13Vdc battery Recover Point, Dedicated for Renewable Energy Systems.
- BTS Seletable.
Technical Parameters
| Model | 45KW |
| Continuous Output Power | 45000W |
| Surge Rating (20s) | 135000W |
| Capable of Starting Electric Motor | 45HP |
| Unbalance Load Acceptable | 100% |
| DC Input Voltage | 48.0Vdc |
| Output Waveform | Pure Sine wave / Same as input (Bypass mode) |
| Nominal Efficiency | 89% (Peak) |
| Line Mode Efficiency | >95% |
| Power Factor | 0.9-1.2 |
| Connection mode | 3-phase 4-wire system+Gnd |
| Output voltage rating | 3AC / N 400V / 207V |
| Output phase voltage | 230VAC |
| Output Voltage Regulation | ±10% RMS |
| Output Frequency | 50/60HZ ±0.3Hz |
| Short Circuit Protection | Yes, Current Limit Function (Fault after 60ms) |
| Typical transfer Time | Typical 6-8ms,10ms (Max) |
| THD | <3% Linear Loac |
| Nominal Input Voltage | 48.0Vdc |
| Minimum Start Voltage | 42.0Vdc / 44.0Vdc |
| Low Battery Alarm | 42.0Vdc / 44.0Vdc |
| Low Battery Trip | 40.0Vdc / 42.0Vdc |
| High Voltage Alarm & Fault | 64.0Vdc |
| High DC Input Recovery | 62.0Vdc |
| Low Battery Voltage Recover | 52.0Vdc |
| Idle Consumption- Search Mode | <100W when Power Saver On |
| Input Voltage Range | Narrow: 96-132VAC / 184~253VAC; Wide 70-135VAC70-135VAC / 140-270VAC; |
| Input Frequency Range | Narrow: 47-55D.3Hz for 50Hz. 57-65D.3Hz for 60Hz Wide: 40-70D.3Hz for 50Hz/60Hz |
| Output Voltage | Same as input |
| Max Charge Rate | 150A*3 |
| Power Factor | 0.97 MAX |
| Over Charge Protection Shutdown | 62.8Vdc |
| Battery type | Float Vdc |
| Gel U.S.A | 13.7 |
| A.G.M 1 | 13.4 |
| A.G.M 2 | 13.7 |
| Sealed Lead Acid | 13.6 |
| Gel Euro | 13.8 |
| Open Lead Acid | 13.3 |
| Calcium | 13.6 |
| De-sulphation | 15.5 for 4hrs |
| Remote Control | Yes. Optional LED/LCD |
| Input Voltage Waveform | Sine wave (Grid or Generator) |
| Nominal Voltage | 230Vac |
| Low Voltage Trip | 184V/154Vac |
| Low Voltage re engage | 194V/164Vac |
| High Voltage Trip | 253V/260Vac |
| High Voltage re engage | 243V/270Vac |
| Max Input AC Voltage | 300Vac |
| Nominal Input Frequency | 50Hz or 60Hz (Auto detect) |
| Low Freq Trip | Narrow: 47±0.3Hz for 50Hz, 57±0.3Hz for 60Hz Wide: 40±0.3Hz for 50Hz/60Hz |
| Low Freq re engage | Narrow: 48±0.3Hzfor 50Hz, 58±0.3Hz for 60Hz Wide: 42±0.3Hz for 50Hz/60Hz |
| High Freq Trip | Narrow: 55±0.3Hz for 50Hz, 65 ±0.3Hz for 60Hz Wide: 70±0.3Hz for 50Hz/60Hz |
| High Freq re engage | Narrow: 54 ±0.3Hz for 50Hz, 64 ±0.3Hz for 60Hz Wide: 68±0.3Hz for 50Hz/60Hz |
| Output Short circuit protection | Circuit breaker |
| Bypass breaker rating (230Vac) | 80A |
| Communication methods | RS32 / 458 / CAN |
| Display | LED+LCD |
